What’s new in AutoDXF?
AutoDXF v5
has been updated to fully support the major changes introduced in
Inventor 2022. AutoDXF v5 allows you to work with assemblies with
multiple model states and can process sheet metal components with
defined model states. AutoDXF v5 works with Autodesk Inventor 2022,
while AutoDXF v4 remains available for older Inventor
versions.
What’s
new in AutoDXF 5.1 (watch video here):
·
New feature: automatic creation
of bend marks at the ends of the bend lines
·
New feature: automatic flipping
of flat patterns so most of the bends are in up
direction
·
New feature: added button to
select/deselect library sheet metal parts
·
New feature: all layer settings
are now consolidated in one location (tab Layers)
·
New feature: Line type scale
setting added to the user interface (tab Layers)
·
New feature: added option to
trim centerlines at inner contours
·
fixed issue with message about
library sheet metal parts not appearing if only one library part
was found
What’s
new in AutoDXF 5.0.2:
·
Fixed an issue with line types
defaulting to Continuous for ‘Bend up’ and ‘Bend down’ layer if
angle info texts are enabled
·
Fixed an issue with wrong mass
values if system decimal separator is dot (.)
·
Added experimental option to
set LTscale for processed DXF files. Option is available in
basic.autodxf.settings.xml settings file
What’s
new in AutoDXF 5.0.1:
·
Changed format of flat pattern
preview thumbnails. Now it works in the same way as model preview
thumbs: it’s always square regardless of flat pattern
shape.
·
Added new option to control the
model and flat pattern thumbnail size when exporting data to
Word
What’s
new in AutoDXF 5.0:
·
Support for Inventor 2022 and
new functionality for Inventor model states
·
Export of bend angles, radii
and directions as texts attached to bend lines in DXF
files
·
Detection of small holes (size
defined as a fraction of sheet metal thickness) and their placement
on a separate layer
·
Improved user interface with
separate tabs for general settings and DXF/DWG file
setup
·
New enlarged preview of the
flat pattern when clicking the preview thumbnail
·
Added settings for text and
angle heights in the user interface
·
Added setting for number of
decimal places for length units
·
Added setting to remove
trailing zeros for decimal places
·
Two options for searching sheet
metal parts are available: Parts Only or Structured Bill of
material
·
Support for high DPI
displays
·
Automatic thumbnail creation
when creating flat patterns
·
Help/documentation now
available on the web (optionally available locally as separate
download)
·
Warning if merged parts are
found in the BOM
·
Warning when library sheet
metal parts are found
·
Added option to check for
program updates